How can I configure my new BSNL broadband modem?

Posted on by Dominique Stacey

How can I configure my new BSNL broadband modem?

Modem configuration:

  1. In the Internet Explorer, type 192.168.1.1 and press enter.
  2. Type username as admin and password as admin and press OK.
  3. Click “Advanced Setup”
  4. Click Edit button against VPI/VCI -0 and 35.
  5. Click Next in the above screen.
  6. Select PPP over Ethernet (PPPoE) in the above screen.

How can I configure my UTStarcom modem for BSNL broadband?

Setup BSNL Type 2 ADSL Modem WA3002 -g1 UTStarcom

  1. Connect to computer.
  2. Login to Setup Page.
  3. Click on Advanced Setup.
  4. Edit VPI settings of PPPoE connection in WA3002 BSNL Modem.
  5. Select PPPoE from the list of network protocols and click next.
  6. BSNL Username and Password.
  7. Choose Save/Reboot WA 3002 -g1 ADSL BSNL Modem.

How do I configure my teracom modem?

Configure Internet Connection on BSNL Teracom Modem

  1. Login. Type 192.168.
  2. Click on Configuration Tab.
  3. Remove old connections configured.
  4. Add a new connection.
  5. Select BSNL Connection Type.
  6. Configure WAN IP Settings.
  7. Set Username and Password.
  8. Reboot BSNL Modem.

How do I reset my teracom modem?

Hard Reset BSNL Teracom Modem You can find a reset button on the back side of your BSNL modem. You have to press it using a pen for at least 30 seconds. You have to ensure that the power light is flashing while you are doing it.

Why can’t I access my modem settings?

Why am I unable to access my modem settings? If you can’t log in to your modem, you could have an issue with the device itself or the browser. Log in from a different browser and double-check the cable connections with the modem. If those fixes don’t work, you may want to power-cycle your modem or factory reset it.

What should be included in a cable modem configuration file?

The Telephone Settings Option configuration MAY be included in the configuration file and if present, and applicable to this type of modem, MUST be supported. The Vendor-Specific Configuration Settings MAY be included in the configuration file, and if present, MAY be supported by a CM.

Why is my modem configuration file not found?

If you’re still seeing the “Modem Configuration file not found” error at this point, it likely means that your particular device is using a version of firmware which isn’t available yet (or is missing) from the download site.

What is the format of a DOCSIS configuration file?

There are both standard fields and vendor specific fields within the file. The file format and the standard fields are defined in the DOCSIS specification. The configuration file in its final form is a binary file, and typically a configuration tool is used to create the file.