What is RG8X cable used for?

What is RG8X cable used for?

Description: DX Engineering RG-8X 50-ohm Bulk Coaxial Cable is a new low-loss, gas injected foam dielectric feedline, with a braided shield and non-contaminating Type II-A PVC jacket. Our 8X is intended for moderate-power HF stations or mobile applications where short runs and flexibility are key factors.

What is the difference between RG8 and RG8X?

RG8. RG8 is a thicker 50 ohm cable, at 12 AWG, that can provide a stronger signal than RG58. There is also a version called RG8X, which is thinner at 16 AWG but provides similar signal quality.

What is RG8X coax cable?

Say hello to our premium RG8X cable, the beefiest coax we carry. RG8X is constructed to be thicker than the RG-58 and is recommended for situations where the coax may see higher-than-average wear or when a stouter cable is desired.

Can you bury RG8X?

Most RG8X will not last long “directly buried” — it’s not rated for that at all, and a lot of RG8X uses a Type I jacket material.

Is LMR 400 the same as RG8?

LMR400 is a cable that’s about the thickness of RG-8, but is constructed differently. You can see how the different types of cable might kinda look the same, but because of how they are engineered and what materials they are made of, have entirely different characteristics.

What coax should I use for HF?

Our Top 7 Best Coax for HF Ham Radio Reviews

1. Superbat UHF Coax Cable. The typical coax cable doesn’t offer you the right level of transmission.
2. Steren 205-700 Coax Cable.
3. Extreme Consumer Expert RG-8X Coax Cable.
4. RFAdapter RG8X Coaxial Cable.
5. MPD Digital LMR-400 Coax Cable.
6. Superbat RF Coax Cable.
7. YOTENKO Coaxial Cable.

Does coax length affect SWR?

As the reflected wave travels back up the cable, it adds to the magnitude of the incident wave where it arrives in-phase with it, and subtracts from the magnitude of the incident wave where it arrives out of phase with it. …

Is rg8x good for CB?

RG-8X is considered premium coax and is the coax that we recommend for CB antenna installations. It is more durable, thicker, with a stranded center which means it is more difficult to damage than a solid core coaxial cable.

Can you bury LMR 400 coax?

Now the ultraflex uses a different jacket material, but the standard LMR-400 uses the same polyethylene jacket (and same thickness) as the DB. The only difference is that it is not self sealing. It can be buried without issue–unless of course someone nicks it in the future…

How deep do you have to bury coaxial cable?

Cable Depth You should bury your cable around 18 inches deep. You should also call your city’s building code office and see if there is a municipal code that specifies the depth for buried cable. Some municipalities require a 24-inch depth.

Which is better LMR400 or RG213?

RG213 is rated for 5000 volts, which is double the voltage rating of LMR400 at 2500 volts. In contrast, LMR400 coax cables are better than RG213 in both loss and power handling, shown by the chart below.

Is LMR-400 the same as rg8?