How do I pair my Ellies remote Blaster?
Pairing Instruction • Unplug the Master Receiver and the Transmitter from power and place them facing each other. Plug both units back into the mains power simultaneously to allow them to identify each other successfully.
How does Ellies Smart Remote Blaster work?
The Smart Remote Blaster. Operate remote controlled devices from any room. Just install the one unit in your bedroom and the other at your satellite decoder / DVD player in your lounge and your normal remotes in your bedroom will operate like magic. -Works with most infrared remote controlled devices.
How do you use a remote Blaster?
Most of the time, the IR blaster will be at the top of the device. Simply point and press the keys on the screen of your Android to control the device you choose. Test your remote functions. Try pressing the power button to turn the device on or off as a starting point, and then work up to other controls.
How do I setup my DStv remote?
Press the DStv button • Go to “Settings” • Select System Settings • Select Remote Control • If the remote is set to TV1 mode, set mode 2 and mode 3 to Ignore. If the remote is set to TV2 mode, set mode 1 and mode 3 to Ignore. If the remote is set to TV3 mode, set mode 1 and mode 2 to Ignore.
How do I change my DStv channel to another room?
If you have a compatible device and TV Link does not work, Do the easy following steps on your decoder with the IR Remote:
- Press Menu.
- Select Advanced options.
- Password 9949.
- Select equipment setup.
- Select TV Link.
- Change to : ON.
- Press OK to save this option.
Why does my remote not change channels?
Remote will not change channels or turn on the TV. Batteries are low, dead, or inserted incorrectly. If the box turns ON or OFF, then install new batteries in the remote and try again. Make sure the equipment is plugged in to an active power outlet.
Why does my DStv remote flash red?
When using the remote : if there is one RED blink, the remote is already in “Standby Relay” or “Volume Relay” mode, but nothing has been programmed to that button, or there is in an error with the programming sequence.
How do I connect a second TV to my DStv HD decoder?
Connect any one of the four cables from the satellite dish directly to the LNB input on the back of the decoder. 1. If you have a HD TV, use the supplied HDMI cable and connect it to the HDMI port (marked 1) on the back of the decoder, then connect the other end to the HDMI port on the TV.
How much is a DStv LNB?
How much does the DStv Smart LNB cost and where can I get one? The recommended retail price of the DStv Smart LNB is R449. It is available via our Accredited Installers, MultiChoice Service Centres and DStv Agencies.
Can I use my phone as remote without IR blaster?
If your phone doesn’t have an IR blaster, you’re not out of luck. If you don’t need to go channel surfing, with a device like the Belkin Miracast™ Display Adapter, you can use compatible apps on your mobile device to cast videos, pictures and other content on your TV.