How do I make my Dlink router an access point?

How do I make my Dlink router an access point?

How to change a D-Link router to AP mode

1. Connect a computer to the D-link router and launch a web browser.
2. Visit the following router configuration page: http://192.168.0.1.
3. You are prompted to enter a username and password.
4. Click Setup > Local Network.
5. Set the DHCP Mode to Off.
6. Click Apply Changes.

How do I setup my DI 524 router?

How to setup WPA-PSK (wireless security) for DI-524?

1. Step 1 Connect Your PC (Laptop) to the Router (Port 1,2,3,4 either one of them) using a network cable.
2. Step 2 Launch IE (Internet explorer).
3. Step 3 Key in your user name and password (User name is Admin with no password by default).

Can a router be an access point?

Wireless routers can function as access points, but not all access points can work as routers.

What is Access Point mode?

Access Point mode is used to connect to wireless clients(wireless adapter cards) such as laptops, desktops, and PDAs. Wireless clients can only communicate to AP’s in Access Pointmode.

How do I access Dlink DI-524?

The D-Link DI-524 does have a default username: admin. The default IP address for the D-Link DI-524 is 192.168. 0.1. This is the address that networked computers connect to; it’s also the IP address you should use as a URL to access the DI-524 through a web browser.

How do I reset my DIR 524 router?

How to Reset the D-Link DI-524 Wireless Router

1. Press the reset button for 10 seconds. You can use a small object, such as a paper clip to hold down the button.
2. Open up your Web browser and enter 192.168. 0.1 in the address bar.
3. For the login, enter admin as the ID and leave the password blank.

Which is better router mode or access point mode?

Router mode is for linking the Internet and a private (LAN) network together. AP mode is for connecting to an existing LAN network. When to use your router in AP Mode: Usually, if you have one router, you would use Router Mode.