How many codes can a Genie garage door opener have?

How many codes can a Genie garage door opener have?

Up to seven remote-operated devices can be programmed into one of the Genie legacy Intellicode garage door openers. That includes a total of seven Intellicode remotes or six Intellicode remotes plus an Intellicode wireless keypad.

How do I change the code on my Genie garage door keypad?

Changing the PIN on a Genie Garage Door Keypad

1. Erase the old PIN. Press and hold the Arrows button, the number 6 button and the “Prog” button.
2. Program the new PIN. Press numbers 1, 2, 3 and then the “Prog” button in that order.
3. Enter your new PIN. It should be a three- to four-digit code.
4. Test the door operation.

How do I reset my genie Keypad pin?

This video from Genie Company demonstrates what to do in the event that you need to reset your PIN. To erase the old PIN programming, press and hold the program button and the up-down button for five seconds. After you have erased the old PIN, you will be able to reset the programming.

Is there a reset button on Genie garage door opener?

Push and hold the square “Program Set” button for at least 3 seconds. Keep holding the button until the circular LED is lit up. The oblong LED adjacent to the circular LED will then flash purple. This puts your opener into Programming Mode, which allows you to reset the device.

Which is better Genie vs Chamberlain?

Chamberlain Garage Door Opener, it’s difficult to make a clear decision one way or the other. The Genie is a perfect pick for those who want to take advantage of HomeLink and Car2U compatibility, as it’s much more flexible on that front than the Chamberlain model that only works with more recent systems.

What kind of keypad does a Genie garage door opener use?

Genie Garage Door Opener Wireless Keypad Model GPWK-12, GWK. (works with remotes having 9 or 12 internal code setting switches. Keypad is black with a slide-up cover showing the Genie logo only) This keyless garage door opener entry pad works with Genie transmitters using 390 MHz frequency.

How do I activate the Genie wireless keypad?

Activate the Genie wireless keypad (GK-R) by opening the battery cover compartment and pull the protective tab. Reinstall the battery compartment door to begin programming. The keypad LED will flash each time a key is pressed and entry is accepted.

Is the Genie Intellicode transmitter compatible with the keypad?

It is NOT compatible with Genie Intellicode transmitters (if your keypad has Intellicode printed on the cover, go to the next set of programming instructions below). The Door Code in the Step-By-Step Procedure at right is determined by the internal code switches inside your transmitter and the accompanying chart.

What should I do if my Genie garage door opener is not working?

Check if the Safe-T-Beams red LED light is flashing. It should be on and steady. (See safe-t-beam diagnostic light guide) Check garage door for binding. If an operational problem exists, and the garage door opener will not close, the opener can be forced to close. Press and hold the wall console button until the garage door is completely closed.