Can you tie down a mini excavator with ratchet straps?

Can you tie down a mini excavator with ratchet straps?

Secure the excavator: With the help of tie-down anchors, you can easily attach chains between the trailer and the machine to hold it securely in place. Once you’ve tied down the machine, you can use ratchet binders to maintain constant chain tension.

How are tie down restraints calculated?

As shown, determine tie-down ratios by dividing tie-down chain length into the effective length for the direction in which restraint is required. Then multiply this ratio by the strength of the tie-down chain or attachment point, whichever is less, to find the restraint received from the tie-down pattern used.

What should I know about chaining down a tractor?

There are three predominant concerns with chaining down: Tight, Secure Chains: There should be no wiggle room or movement with your chain. Equipment cannot shift or bounce while en route. Properly Located Tie-Down Points: Most manufacturers label the appropriate tie-down points on their machines for you to follow.

What’s the proper way to chain down an excavator?

Here are a few additional reminders in order to achieve the proper way to chain down an excavator, loader, and more: No slack. Wrap excess chain around the rest of the link so it won’t come loose. At least four chains in use. Use two connecting to the trailer’s front corners and two connecting to the trailer’s back corners.

How are tie down chains and binders attached?

Tie-down chains and binders have hooks at the ends for attaching them to a trailer or tie-down point. You can anchor a chain by hooking it to a tie-down like a D-ring.

How big of a chain do I need to tie down a load?

The load being tied down must not exceed the combined WLL of all the chains being used. For example, if your cargo weighs 8,000 lbs and you will use 4 chains, each chain must have a WLL of at least 2,000 lbs. Four chains of 2,000 lbs WLL each will equal 8,000 lbs total, enough capacity to secure an 8,000 lb load.