What are some conversion factors?

Posted on by Dominique Stacey

What are some conversion factors?

Examples of conversion factors include:

  • 1 gallon = 3.78541 liters (volume)
  • 1 pound = 16 ounces (mass)
  • 1 kilogram = 1,000 grams (mass)
  • 1 pound = 453.592 grams (mass)
  • 1 minute = 60000 milliseconds (time)
  • 1 square mile = 2.58999 square kilometers (area)

What are the five conversion factors?

Conversion Factors

  • Length. 1 kilometer (km) = 1000 meters (m)
  • Area. 1 square meter (m2) = 10.76 ft2
  • Volume. 1 liter (l) = 1000cm3 = 1.057 quart (qt) = 61.02 in3 = 0.03532 ft3
  • Mass. 1 kilogram (kg) = 2.2046 pounds (lb) = 0.06852 slug;
  • Speed. 1 km/h = 0.2778 m/sec = 0.6214 mi/h = 0.9113 ft/sec.
  • Density.
  • Force.
  • Energy.

What is the formula for the conversion factor?

Find the conversion factor by dividing the required yield (Step 2) by the recipe yield (Step 1). That is, conversion factor = (required yield)/(recipe yield).

What is the conversion factor for CM to inches?

0.3937
The conversion factor for converting centimeters to inches is 0.3937. This conversion comes from dividing 1 by 2.54, the conversion number for converting inches to centimeters. There are 2.54 centimeters in 1 inch.

What is the standard unit of length?

meter
The standard unit for measurement of length is meter. Apart from the meter, we have various units such as a meter, kilometer, millimeter, feet, inches, and so on. Meter is also called the SI unit of length or base unit of length.

What is the conversion factor in a basic unit conversion?

A conversion factor is a number used to change one set of units to another, by multiplying or dividing. When a conversion is necessary, the appropriate conversion factor to an equal value must be used. For example, to convert inches to feet, the appropriate conversion value is 12 inches equal 1 foot.

What are the conversion factors for mass and length?

1 Length 2 Area 3 Volume 4 Mass 5 Speed 6 Density 7 Force 8 Energy 9 Power 10 Pressure

Which is the correct conversion table for length?

LENGTH CONVERSION TABLE. This is an online length conversion table which provides conversion factors between various commonly used units of length measurement. It consists of following common length units: millimeter (mm), centimeter (cm), meter (m), kilometer (km), inch (in), feet/foot (ft), yard (yd) and mile.

Which is an example of a conversion factor?

Example 1 – Ralph wants to know how many seconds are in 3 hours and 36 minutes. Step 1. Change 3 hours and 36 minutes to the same units. This unit can be hours or minutes. Using minutes is easier because the end time value will need to be in seconds. The appropriate conversion factor is: 1 hour = 60 minutes. Step 2.

What are the conversion factors for 1 liter?

The above conversion factors are derived from the following factors: 1 inch (in) = 2.54 (exact) centimeters (cm) 1 liter (L) = 1,000 cubic centimeters (cm3) 1 pound (Ib) =0.45359 kilograms (kg) Other Conversion Factors.