How do I reset my STC router?

Posted on by Dominique Stacey

How do I reset my STC router?

Note: If you reset the device, the device will return to factory defaults, you will lose all your settings.

  1. Step 1 Turn off the router.
  2. Step 2 Press and hold the reset button on the rear panel with a pin, then turn on the router.
  3. Step 3 Release the reset button and wait for the device to reboot.
  4. Note:

How do I reset my modem to factory settings?

How do I factory reset my modem?

  1. Locate the Reset button, protected by a pinhole at the back of your modem.
  2. Grab an object such as a pen, toothpick or paperclip.
  3. Push and hold down the Reset button for 10-15 seconds (no more).
  4. Wait for 5-10 minutes as your modem resets itself.

How can I reset my STC modem password?

Change the WiFi password with STC Alcatel Open the IP address http://192.168.1.1 > login to your account > select “Network” > then select “WIFI” > “SSID1”. After this, enter the following codes in the fields provided; SSID: Wifi Username. Wireless SSID Broadcast: Enable.

How do I reset my modem ISP?

How to reset your router

  1. Step One: Unplug your router from the modem and remove its power cord.
  2. Step Two: Leave the device alone for 20 to 30 seconds and then plug everything in again.
  3. Step Three: Turn on the router and wait for a few seconds for the device to resume operation.

What happens if I reset my modem to factory settings?

A reset restores your modem to its factory default settings. It will also erase any customized settings you may have changed, including static IP address setup, DNS, personalized password, WiFi settings, routing and DHCP settings.

Does Resetting router reset password?

NOTE: Resetting your router to its default factory settings will also reset your router’s password. The router’s default password is “admin” as for the username, just leave the field blank. IMPORTANT: Make sure that the Power LED of the router is blinking when you press the Reset button.

How do I reset my modem password?

All you have to do is press and hold the reset button on the back of your modem for 7 seconds. Once you release the button the modem will reboot with its factory settings. After the modem reboots, you can log into the modem with its default password and manually change it to a new one that is more secure.

Where is the reset button on my STC modem?

No matter if you have the STC modem or any other modem, the reset button is almost similar to all modems. The reset button is located at the back of the modem, and it is mostly red in color. Most often, the button is recessed so that people don’t turn it on or off by mistake.

How to change password for STC WiFi, modem / router?

Congratulations, you have successfully changed the username and password of the STC Alcatel router. Open the IP address http://192.168.1.1 > login to your account > select “Network” > then select “WIFI” > “SSID1”. After this, enter the following codes in the fields provided;

Where is the reset button on my modem?

The reset button is typically red and can be found on the back of the modem. To reset your modem using the button, follow these steps: 1. With the modem plugged in and powered on, press in the reset button (using a bent paperclip or pen tip) until you feel or hear a slight click. Hold it in for 10 seconds.

How do I Reset my CenturyLink modem to default settings?

1. With the modem plugged in and powered on, press in the reset button (using a bent paperclip or pen tip) until you feel or hear a slight click. Hold it in for 10 seconds. 2. Release the button when the power light turns amber (orange) .