How do I connect my Sky box to an iO?

How do I connect my Sky box to an iO?

1. Turn off the power to your Sky box.
2. Plug iO Link into iO port on the back of your box.
3. Connect the iO Link to the TV Link using the coaxial cable.
4. Turn the power back on. ( Wait 3-4 mins before trying to take your Sky box out of standby)

How do I connect my magic eye to My Sky HD box?

Plug your tvLink into the second TV’s aerial socket. Position your tvLink’s magic eye (the part that looks like a computer mouse) with a clear line of sight to your Sky remote. Switch your Sky box, and everything connected to it, on at the mains. You should see a red power light on your tvLink.

How do I turn on RF2 on Sky HD box?

How do I activate the RF2 output on my SKY™ box?

1. Press the SERVICES button.
2. Press the NUMBER 4 button, then the NUMBER 0 then the NUMBER 1 button.
3. Press SELECT button.
4. Press the NUMBER 4 again.
5. Press the DOWN ARROW button once.
6. Press the SIDE ARROW button once.
7. Press the DOWN ARROW button once again [save new settings]

Where is RF output on Sky Box?

The RF Output Channel is in the Installer Menu. If you have a Sky+HD box, you get to the Installer Menu by keying Services,0,0,1,Select on your remote. For earlier Sky boxes, it’s Services,4,0,1,Select. With regard to the kitchen TV, check that it has an analogue tuner.

Why is my Sky Magic Eye not working?

Re: New sky+ box and magic eye not working First thing to try is re-tuning one of the connected TVs, via its setup menu. Your new Sky box may have a different RF Output Channel setting from your old one. If rescanning for channels on the 1 tv finds an acceptable picture from your Sky box, re-tune the other 2 as well.

How do I get the hidden menu on my Sky HD box?

There are a few settings in the SKY HD box which are contained in a hidden menu such as the activation of the RF2 port which is used for distribution of the SKY channel to other screens. To access this menu, press the following button combination: Press ‘Services’ and then press; 0, 0, 1, and then ‘Select’.

What is rf1 and RF2 on Sky Box?

RF 1 goes to your TV, RF2 can feed a second television. The second TV can then be controlled with a ‘magic eye’ so you can change the channels from another room. I’ve done this on the old Sky boxes but not on Sky+ / HD.

How do you change RF output on Sky HD box?

From the Sky remote, press the Services button. Type 4 0 1 on the keypad and press the “Select” button. You now find yourself at the Installers menu – Scroll to “RF Outlet”, and there you can change the RF number and turn on the power. Save your settings, and leave the menu.

Can I pair my Sky card with two boxes?

As long as you have Internet at both locations, you could pair the card on-line from the box – this ‘might’ prevent any problems with the frequent card swapping.