How do I fix E2 error on my dishwasher?
E2 – Abnormally long drain time. Check to make sure that the drain line is not obstructed or bent in a way that restricts water flow. Make sure the drain line is routed below the height of the dishwasher and that it has not been extended. This will inhibit the ability of the drain function to operate properly.
How do I reset my Baumatic dishwasher?
Press the power button and hold the P button for a while to turn the dishwasher off. The button should be released when the machine flickers to life.
What does F2 on a dishwasher mean?
If your dishwasher doesn’t drain properly, you’ll see standing water on the bottom of the dishwasher when the cycle is complete and the error code F2 may be displayed, according to the Westinghouse dishwasher user manual. Debris may be clogging it and preventing water from draining properly.
Why is the glass light flashing on my dishwasher?
The flashing lights and the beeping sounds for most dishwashers mean: Blinking or Flashing of the Start and or Reset light or button: This may mean the dishwasher is in the “turning off mode”. Once the dishwasher stops flashing or blinking, try and start a wash cycle to see if it will wash with no problems.
How do you drain a Baumatic dishwasher?
Check the drain pump filter is clean (FS) Place a shallow dish or washing up bowl down at ground level behind the machine and carefully lower the grey waste hose into the bowl, the water should now start to flow out into the bowl.
What does E2 and F2 mean on a dishwasher?
Maytag Dishwasher F2 E2 Error Code Meaning If this code appears on your dishwasher display, it means that there is a communication failure between the electronic control and the touchpad.
What does F2 mean on a CDA dishwasher?
Thanks for that. F2 error code is a draining fault im afraid. What you need to do is cehck the waste hose and were it drains to. Make sure thats all ok. If thats fine and the dishwasher isnt draining the water then its possibley a blocked or faulty pump.
What is the ERR code on a Baumatic dishwasher?
Baumatic dishwasher error codes are displayed with a capital E followed by a single number. See the most common codes here: Other error codes may be slightly different with Err displayed before the numbers. This will depend on your appliance model. And definitions will be fully explained in your manufacturer’s manual.
What should I do if my Baumatic dishwasher is not working?
Check the water pressure of your mains water supply. Clean the mesh filter that sits in the inlet hose. Ensure that the inlet hose is not kinked or crushed. Make sure the water tap that the machine is connected to is turned on fully.
Is there a fault code on my washing machine?
Fault codes or error codes for appliances including washing machines, washer dryers, cookers, dishwashers and fridges. Please do take care to read the information thoroughly as it is there to help you understand fault codes and to keep you safe.
What does an error code on a Bosch dishwasher mean?
These error codes will help you to troubleshoot a Bosch dishwasher. Search the necessary code in the table to identify the problem. Usually this means that the heating element is malfunctioning. Replace the heating element if necessary. Examine the filters and clean them from accumulated debris.