How do I reset my Cisco Air ap2802i B K9?

How do I reset my Cisco Air ap2802i B K9?

Reset Cisco Wireless AP to factory defaults

1. Connect the console cable.
2. Unplug the power or network cable if connected to a POE switch.
3. Press and hold the Mode button.
4. Plug the power back into the AP.
5. Wait until the output on the console says button is pressed.

How do I reset my wireless access point?

Unplug the access point’s power cable and wait for 30 seconds then plug it back in. Wait for the access point’s lights to appear solid. NOTE: Make sure to press and hold the Reset button properly. The lights on the access point should be blinking while you are holding the Reset button.

How do I reset my AP 7522?

A – From the web browser:

1. Log into the controller and go to Dashboard.
2. In menu tree, Expand System.
3. Expand the RF domain.
4. Select the AP you’d like to reset.
5. From drop down to the right of the AP name select “Factory Reset”
6. Select the reset option from the list (see note)
7. Click on the Factory Reset button.

What is Cisco AP default password?

In the absence of a DHCP server, the access point will fallback to the default static IP address after 60 seconds. Step 3. Login with the default credentials. The default username is cisco, and the default password is cisco.

How do I fix access point problems?

How to Fix Problem With Wireless Adapter and Access Point Error

1. Make sure your wireless adapter is on.
2. Disconnect and reconnect to the wireless network.
3. Check the configuration of the wireless network connection.
4. Forget the wireless network and connect again from scratch.
5. Reboot your access point.

How do I connect to WiFi After resetting?

How to configure your Router after Reset?

1. Launch any of your favorite browsers.
2. Type in the address 192.168.0.1 in the address bar.
3. Enter the user name and password.
4. When you log in to the router for the first time, you will be prompted to change it.
5. Enter the Quick Setup option.