How do I set up audio 6?

Posted on by Dominique Stacey

How do I set up audio 6?

SPECIALS

  1. STEP 1: DOWNLOAD, INSTALL, AND RUN NATIVE ACCESS. DOWNLOAD (Mac) DOWNLOAD (Win)
  2. STEP 2: ENTER SERIAL NUMBER. Select ‘Add serial’, and enter your KOMPLETE AUDIO 6 serial number as shown on the flyer in your product box or on the underside of your hardware unit.
  3. STEP 3: INSTALL SOFTWARE.
  4. STEP 4: DOWNLOAD CUBASE LE.

How do I set up audio on Traktor?

Setting up your Audio Interface in TRAKTOR DJ

  1. Connect your compatible NI audio interface to your iOS device.
  2. Launch TRAKTOR DJ.
  3. Press the gearwheel symbol to access the TRAKTOR DJ Preferences.
  4. Select the Audio Setup menu and check the output channels to be used as Master Outputs and Monitor Outputs.

How do I record a mix with Traktor Audio 6?

Go to Preferences > Mix Recorder. Select External to configure the Mix Recorder for recording an external audio signal. In the menu External Input, select the channel assigned to the input channel of your audio interface.

Does Komplete Audio 6 need a driver?

If you want to use the audio interface with a Mac, see section ↑2.1, Installing KOMPLETE AUDIO 6 on Mac OS X. Mac OS X: No driver installation required. On Mac OS X no driver installation is re- quired. As a class-compliant USB 2.0 device, KOMPLETE AUDIO 6 uses the operating system’s built-in drivers provided by Apple.

Is Komplete Audio 6 an amp?

Two mic inputs are armed with high-end pre-amps while Cirrus Logic converters deliver pristine, transparent sound. Komplete Audio 6 is the perfect studio upgrade for those who want pro-level recordings at an affordable price.

What’s the best latency setting for Traktor?

512 MS
The recommended setting for using Traktor on most MacBook Pro is 44100 Hz Sample rate and 512 MS Latency. This is because this is the standard sample rate used by most CDs. If you’re a turntablist, you might want to use a lower latency setting.

How do I reset my Traktor settings?

2. Restore the Controller’s Default Settings

  1. Make sure your controller is not connected.
  2. Go to Preferences > Traktor Kontrol *controller name*.
  3. Click the Restore button under Restore Default.
  4. Confirm that you want to reset your controller by clicking Yes.
  5. Connect your controller.

Where are Traktor recordings?

The recorded files appear in the Audio Recordings folder of your TRAKTOR Browser and are saved in the following default folder on your hard drive:

  • Mac: User > Music > Traktor > Recordings.
  • Windows: My Documents > MyMusic > Traktor > Recordings.

Where is the record button on Traktor?

Open the Audio Recorder Panel in TRAKTOR’s Global Section. It’s at the same place in the user interface as the second FX Panel. Clicking on the tape symbol makes the Audio Recorder visible (see screenshot).

Does Komplete Audio 6 have phantom power?

You can use a microphone with the KOMPLETE AUDIO 6 to record your voice or any other sound source. Condenser microphones require phantom power, while dynamic microphones do not.

How do I set up Traktor audio 6 / 10?

Make sure that the TRAKTOR AUDIO 6 / 10 is connected to the computer. Note: While the Mac OS X control panel displays only the Channel Setup menu, the Windows control panel displays two additional menus, Audio Settings and Diagnostics. The startup configuration is done in both cases in the Channel Setup menu.

Is there an external power supply for Traktor audio 6 / 10?

External Power Supply and Direct Thru with the TRAKTOR AUDIO 6 / 10 The Direct Thru mode on each of the TRAKTOR AUDIO 6 / 10 input channels is useful for switching over to analog mixing in a hybrid TRAKTOR SCRATCH Timecode setup (e.g. TRAKTOR software mixing and vinyl mixing).

Can a Traktor be used in direct thru mode?

The Direct Thru mode on each of the TRAKTOR AUDIO 6 / 10 input channels is useful for switching over to analog mixing in a hybrid TRAKTOR SCRATCH Timecode setup (e.g. TRAKTOR software mixing and vinyl mixing). It is also possible to perform analog mixing via the TRAKTOR AUDIO 6 / 10 in Direct Thru mode even without a computer.

How to use Traktor with an external audio interface?

Connect your compatible NI audio interface to your iOS device. For NI audio interfaces, you can follow the instructions given in this article. Launch TRAKTOR DJ. If your soundcard is being connected for the first time, you will see a panel with the layout of the audio interface describing the sound output setup.