How do I use my EVOD vape pen?
The Tube in the center of the Liquid Body leads straight into the mouthpiece. Next, just turn on the EVOD Vaporizer, hold down the silver button, and put the mouthpiece to your mouth and pull. Your vaporizer should be working now and vaping should come easily.
How do I know when EVOD is charged?
The battery will flash 3 times and turn off when attached to the charger. When the battery is fully charged, the LED on the USB charger will turn from red to green.
How do I turn on my EVOD pen?
Turning on your EVOD Vape Pen To turn your EVOD on, push the button five times. The LED light on the button will flash three times, indicating that it has been turned on. You can turn it back off again by pushing the button 5 times, and this will keep it from accidentally activating in your pocket or your purse.
How do you use an eGo DAB pen?
How to use the eGo T
- Screw and connect the eGo-T battery with the eGo-T tank atomizer.
- Step 1: Cut the plastic package;
- Step 2: Remove the rubber from the end of the cartridge.
- Step 3: Take off the eGo-T cartridge plastic cover.
- To operate the battery press the button 5 times to switch it on and repeat to switch it off.
Why is my EVOD blinking?
That’s usually an indicator that the battery is dead, there’s a short, or just that the center pin on the battery needs to be pulled up. You can use a toothpick or something similar to gently pry the pin up.
What does it mean when my EVOD blinks?
What does it mean when my eVod blinks?
Why is my EVOD blinking 15 times?
When the Kanger Evod battery power is low, the LED will flash approximately 15 times when the button is pressed to indicate that the battery needs to be charged. Depending upon the charge within the battery, it could take up to 4 hours to fully charge the battery.
How do you turn on the evod pen?
Turning on your EVOD Vape Pen Your EVOD arrives in the default position of “off,” so if you push the button it will not work even if it is fully charged. To turn your EVOD on, push the button five times. The LED light on the button will flash three times, indicating that it has been turned on.
How do you turn on the evod light?
To turn your EVOD on, push the button five times. The LED light on the button will flash three times, indicating that it has been turned on. You can turn it back off again by pushing the button 5 times, and this will keep it from accidentally activating in your pocket or your purse.
How to charge an evod vape pen at home?
1 Locate the USB charging port on your EVOD Vape Pen 2 Insert one end of the USB cable into the charging port 3 Insert the other end to the power source, then switch the power source on 4 There are LED lights on your EVOD Vape Pen that can blink between Green and Red when charging and solid green when the… More
What’s the best way to use an evod?
Step #4: Screw the atomizer into the EVOD mod. Make sure that it’s screwed on tightly. Then, turn on the mod by pressing the power button the proper number of times. Final Step: In order to fire a hit, press the firing button. You should notice an even amount of smooth, clean-tasting vapor that satisfies your needs.