How do you calculate diesel density?
Density Check (to check petrol and diesel) Fill about 3/4th of the jar with the product, through the nozzle of the dispensing unit. Dip the thermometer and the hydrometer in the jar and record the temperature and density as indicated.
What is the density of petrol and diesel?
| Fuel | Density@15°C – ρ – | Specific Volume – v – |
|---|---|---|
| (kg/m3) | (m3/1000 kg) | |
| EN 590 Diesel 2) | 820-845 | 1.18-1.22 |
| Gas oil | 825-900 | 1.1-1.2 |
| Gasoline | 715-780 | 1.3-1.4 |
What is the density of #2 diesel?
2 diesel fuel is between 30 and 42. The specific gravity, at 60/60°F, and the density, at 15.6°C, are between 0.88 and 0.82.
What is the specification of diesel?
Table 2
| Property | Unit | Specification |
|---|---|---|
| HSD† | ||
| Kinematic viscosity @40°C | cSt | 2.0-5.0 |
| Sediment, max | % m/m | 0.05 |
| Density @15°C | kg/m3 | 820-860c |
What is the density of high speed diesel?
Naphtha General or High Aromatic Naphtha
| Diesel specification for Bharat Stage III and Bharat Stage IV (High Speed Diesel confirms to IS 1460 : 2005, Amendment 1, 2007 & Amendment 2, Mar.2010) | |
|---|---|
| Characteristics | Requirements of HSD Bharat Stage III |
| Total Contamination, mg / kg | 24 |
| Density at 15°C kg/cu.m | 820 – 845 |
What is No 2 diesel?
No. 2 diesel fuel that has a sulfur level no higher than 15 ppm. It is used primarily in motor vehicle diesel engines for on-highway use. A distillate fuel oil that has a distillation temperature of 640 degrees Fahrenheit at the 90-percent recovery point and meets the specifications defined in ASTM Specification D 396.
What is ASTM in diesel?
ASTM D975 is the Standard Specification for Diesel Fuel Oils. It is not one test, but rather, it is the specification that describes 13 tests and their acceptable limits, which a diesel fuel must meet at the time of delivery.
What is High Speed diesel?
High Speed Diesel (HSD) HSD is normally used as a fuel in medium and high speed compression ignition engines (operating) above 750 rpm) in commercial vehicles, stationary diesel engines, locomotives and pumps etc.
Why does diesel have a higher energy density than gasoline?
Because of the size and length of the hydrocarbons in diesel, diesel has a high energy density. But, the energy density of diesel is not the only reason diesel engines are more fuel efficient than gasoline-powered engines. Not only is diesel a better fuel, diesel engines are better engines with respect to thermal efficiency.
What is the range of diesel density?
The density of petroleum diesel is about 0.85 kg/l – about 15-20% higher than the density of gasoline, which has a density of approximately 0.70-0.75 kg/l.
What is the unit of measurement for diesel density?
Density of diesel in a few select units of density measurement: Density of diesel g cm3 = 0.85 g/cm³ Density of diesel g ml = 0.85 g/ml Density of diesel g mm3 = 0.00085 g/mm³
Is biodiesel dirtier than regular diesel?
In fact, biodiesel produces 47% less harmful particulate matter than regular diesel fuel. This means that biodiesel burns much cleaner than regular diesel which makes the air safer to breathe. According to the Department of Energy, certain variations of biodiesel have the ability to reduce engine carbon dioxide emissions by up to 74%. In addition to being better for the environment, biofuel is also better for diesel engines too.