How do you program a liftmaster 66lc?

Posted on by Dominique Stacey

How do you program a liftmaster 66lc?

Quick Guide to Programming the Liftmaster 66LM

  1. Press the “learn” button on the motor unit. The indicator light will turn on for 30 seconds.
  2. Within 30 seconds, enter a four digit personal identification number (PIN) of your choice on the keypad.
  3. Let go of the button when the motor light blinks.

How do you program a LiftMaster g387lm keypad?

Universal Keypad (387LM) Programming Instructions

  1. Press and hold the star and the # keys together until the lights on the keypad stops blinking.
  2. Select a 4-digit PIN of your choice and press the # key.
  3. Enter the ID from Chart C below and press #
  4. Enter the DIP switch sequence of 1’s and 2’s that you recorded and press #

How do you program a LiftMaster keypad without a Enter button?

Steps To Programming Your Keypad Without Enter Button

  1. Step 1: Disconnect Your Opener. Unplug your garage door opener.
  2. Step 2: Remove The Faceplate. Remove the faceplate.
  3. Step 3: Switch The Mode.
  4. Step 4: Change The Pin.
  5. Step 1: Find The Learn Button.
  6. Step 2: Enter New Code.
  7. Step 3: Lights Will Blink.
  8. Step 5: Test It.

How do I change the code on my Chamberlain keypad?

Change an Existing PIN Press the programmed PIN that you want to change. Press and hold the # button until the garage door opener light blinks twice. Enter the new 4-digit PIN of your choice, then press the ENTER button. The opener lights will blink once.

How do you change the code on a LiftMaster keypad?

Follow these simple steps if you would like to add, program or change the code of your LiftMaster keyless entry:

  1. Step 1: Locate the Learn button on your opener.
  2. Step 2: Press and release the Learn button.
  3. Step 3: Within 30 seconds, enter a new four-digit code on the keypad and press ENTER.