How much torque can a 14 bolt handle?
First appearing in 1973, the 14-bolt is one of the most used rear axles in the General Motors stable. Found under ¾- and 1-ton GM trucks, vans and SUVs, the 14-bolt received a max torque rating of 6,242 pounds.
What bolt pattern is a 14 bolt?
GM 14-Bolt Specs
Pinion Bearing Preload (Inch lbs) | 25 – 35 (new bearings) 5-15 (reused bearings) |
---|---|
Axle Shaft Diameter (inches) | @ splines 1.54″, @ neckdown 1.367″, operating diameter 1.351″ @ flange 1.458″ 30 splines |
Axle Flange Bolt Pattern | 8 on 3.523″, 1/2″ holes, bolts are 1/2-NC13x1.5″ |
Is a 14-bolt A 1 ton axle?
The 14-Bolt Is The Ford 9-Inch Of 1-Ton Trucks Every diesel-powered pickup sold in the United States for the last 10 years has a full-floating rear axle. Fords currently use a 10 1/2-inch axle made in a plant in Sterling Heights, Michigan-so most people refer to this axle as the Sterling 10 1/2-inch.
Is a GM 14-Bolt a Dana 60?
Dana 60 rears have served under Dodges, Fords, GMs, Internationals, and Jeeps. GM Corporate 14-bolts, of course, came from the factory only in Chevys and GMCs….The Heavy Hitters Duke It Out.
Ratio | 60 | 14-bolt |
---|---|---|
4.86-4.89 | yes | yes |
5.13-5.14 | yes | yes |
5.29-5.38 | yes | no |
5.86-5.89 | yes | no |
Is a 14 bolt A 1 ton axle?
Where do the bolts go on a 14 bolt axle?
This is because the wheel hub on a full-float 14 bolt axle will stick out beyond the wheel mounting surface anywhere from (roughly) 2 to 4 inches. The axle bolts to the end of the hub, and on a full-float axle you can see a set of bolts at the axle end in addition to the 8 lugs you see on the wheel.
How to tell if a Bible has 14 bolts?
It is most easily distinguished by its huge, uniquely shaped diff cover that is, of course, held on with 14 bolts. It is also fairly easily distinguished from other 1 ton full-float rear axles by the removable pinion support, that can be clearly seen just behind the pinion yoke in this picture.
How can I tell if my 14 bolt is semi float?
You can spot a semi-float 14 bolt axle by counting the lugs (if it’s a six lug wheel, it’s a semi-float), or by looking at the wheel surface. On a semi-float axle, the axle shaft terminates at the wheel mounting surface. So, there will not be a visible axle end. NOTE: Some semi-float axles have 8 lug nuts.
Where can I find a GM 14 bolt?
The 14bolt is found in a huge number of GM 4×4 pickup trucks and vans, 3/4 and 1 ton, from the 70’s right through until at least the 2000’s. You can find it in: As well as a whole lot more cab and chassis trucks, delivery vans, etc.