How to apply PaveCoat?
Mix 1 part Nu-EcoSafe Degreaser to 4 parts water. Apply by plastic watering can or pump spray pack, liberally to the soiled area. Allow the solution to activate on the surface for a minimum of 2 hours. High pressure clean with a recommended minimum water pressure of 2000 psi.
Do you need to seal concrete?
You do not have to use a cure and seal, but it is important to seal your concrete. Sealing your concrete will protect it against damage and deterioration against water absorption and surface abrasion. Sealed concrete is more resistant to: Cracking, spalling, and pitting.
Can you tint paving paint?
Oil-based Paving Paint may also be tinted to match any COLORBOND® colour.
How long does Berger Jet Dry take to dry?
Allow a minimum 48 hrs drying time after application of final coat before subjecting the painted surface to normal pedestrian traffic. Motor vehicles should be left off the surface for a minimum of 7 days.
Do concrete sealers work?
Today, high quality concrete sealers can block up to 99% of surface moisture. The chemical reaction bonds active ingredients within the substrate blocking surface moisture. Penetrating sealers generally do not significantly modify substrate appearance or traction. Lifespan is generally 5 years or more.
What is the best paint for paving slabs?
Resincoat Outdoor Patio Paint is the perfect way to paint your stone or concrete flag patio area. This one-pack acrylic paint is easy to apply with a brush or roller and will seal and protect the existing surface as well as giving a clean, attractive matt finish.
Which is the best paint for paving?
One of the best paving paints, Haymes QuickPave has superior long lasting exterior durability, superb coverage and effortless application. Haymes QuickPave products are resistant to oil and hot tyres, suitable for floors, paths, driveways, garage floors, patios, concrete, stone and brick surfaces.
Can you spray Berger Jet Dry?
It is recommended to thin the first coat of Berger Jet Dry Heavy Duty with up to 10% by volume of Mineral Turpentine to aid penetration. Apply using either a brush, roller or spray gun. Air and surface temperature must be above 10°C and below 30°C during application and drying.