Is a 160 temperature range?
Temperature testing consists of non-operational ground survival temperatures as low as -55 C and operational high temperatures of 70 C. Altitude testing as high as 70,000 feet as well as decompression (emergency descent) and overpressure testing (routine aircraft pressurization system testing) is also required.
Do 160g Do section 16?
RTCA/DO-160 Section 16 test procedures are used to determine whether the EUT can operate during different AC and/or DC power variations that occur during normal and emergency aircraft operation.
Is it safe to crash a 160?
The purpose of RTCA DO-160 operational shock and crash safety test is to determine the ability of equipment to continue to operate during normal aircraft operations. Events such as taxiing, landing or when the aircraft encounters sudden gusts in flight can cause shocks on the aircraft and its components.
Do 160g Do section 26?
The RTCA DO-160 Section 26 covers fire testing and flammability testing. Flammability and fire tests apply to equipment installed on fixed wing propeller driven aircraft, fixed-wing turbojet aircraft, turbofan aircraft, prop fan aircraft, and helicopters.
Can you do a 160 temperature test?
The purpose of DO-160 temperature variation testing is to assess the performance characteristics of airborne equipment when exposed to sudden, extreme changes in temperature. This procedure includes five categories that address temperature change rates for equipment installed in or on aircraft.
Does 160G Do Section 4?
RTCA/DO-160G Section 4.0 Testing Summary: This section of the standard covers temperature testing and altitude testing or equipment intended to be installed on aircraft. The altitude testing includes altitude testing, decompression testing and overpressure testing. The altitude testing peaks at 70,00 feet.
Does lightning DO-160?
DO-160 specifies several canonical wave forms which emulate Lightning Induced Transients. The standard defines a series of prototypical waveforms which are used to apply current and voltage to the interface pin of the unit under test.
Does 160 inrush current test?
The RTCA DO-160 power inputs test defines the test conditions and procedures for ac and dc electrical power applied to the terminals of equipment to be tested. 115 Vrms ac and 230 Vrms ac at either a nominal 400 Hz frequency or over a variable frequency range which includes 400 Hz.
Do I qualify for 160?
DO-160, Environmental Conditions and Test Procedures for Airborne Equipment, published by RTCA (Radio Technical Commission for Aeronautics), is the international standard that defines environmental test conditions and applicable test procedures and criteria for avionic equipment to determine their performance …
Does 160 voltage spike?
The RTCA DO-160 voltage spike test determines whether equipment can withstand the effects of voltage spikes. These spikes arrive at the equipment on its power leads. This can occur via either ac or dc power. The adverse effects voltage spikes can have on equipment are numerous and range in degree of severity.
Does 160 have indirect lightning?
DO-160 lightning induced transient susceptibility or indirect lightning is typically the most severe transient test in all of DO-160. However, cable bundle testing requires the unit to operate through the lightning strike making the unit more susceptible to failure.
When did do-160d section 16.0 change 2?
Change 2 to DO-160D, published June 12, 2001, revised Section 16, by including new tests, and modifications to existing testing, to address the issues of AC harmonic current content and variable frequency AC power systems.
When to use RTCA / DO-160 section 16?
RTCA/DO-160 Section 16 test procedures are used to determine whether the EUT can operate during different AC and/or DC power variations that occur during normal and emergency aircraft operation.
What does category a mean in DO-160?
Category A (CF) designates ac equipment intended for use on aircraft electrical systems where the primary power is from constant frequency (400 Hz) ac system. A (CF) designates the same equipment as the ac ones designated by Category A in DO-160 / ED14 issues A to D.
What does The DO-160 power input test mean?
RTCA/DO-160 Power Input Test Lab Test Designations AC Distortion Tests: Designation H This power input test equipment designation relates to ac equipment with an individual maximum power consumption greater than 35 VA or installations where the combined power consumption of multiple units, of the same equipment type, is greater than 150 VA.