What are jubilee clips made from?
At Jubilee® we produce stainless steel clips in 304 and 316 grades only; both of these are acceptable for marine use and Lloyds register approval, whereas ferritic grades are not.
How strong are jubilee clips?
Twice the tightening torque of standard worm drive hose clips which creates more than twice the band tension for stubborn leakage and high vibration applications. Breaking torque is 17 Nm comparable to conventional ‘T’ bolt clips of equal size. Recommended tightening torque 11.9 Nm (106 lbs in).
Are jubilee clips stainless steel?
316 Stainless Steel (HNSS)
Why is a Jubilee clip so called?
But what is the tale behind the name Jubilee Clip? The trademark Jubilee goes back to 1921 when the worm drive hose clip was invented and patented by Commander Lumley Robinson. Lumley had spent time in the British Navy and during his time there realised a new way to attach a hose to a pipe was needed.
Are jubilee clips illegal?
In conclusion there is no specific legislation that bans jubilee clips or, conversely insists on another specific safer solution. What employers should take note of is the presence of the Management of Health and Safety at Work Regulations and PUWER.
Can you over tighten a Jubilee clip?
Over tightening a jubilee often distorts the pipe and you end up with leaks.
Can you over tighten a jubilee clip?
How much weight can hose clamps hold?
Our Hose Clamps can be hand tightened up to 15.5 NM (135 in/lbs.) without the screw slipping or distorting the screw cage during its installation and use providing a reliably strong and stable clamping force and a long-lasting hold that is ideal for most demanding applications.
How do jubilee clips work?
Jubilee Hose Clips are hose clamp clips in the form of a circular metal band, with a worm gear fixed to the end. When this worm gear is turned, the clip loosens and tightens. The design of a Jubilee clip is simple, but very effective at clamping pliable hoses to solid fittings.
Can you use Jubilee clips on gas hose?
A simple jubilee clip will do on both ends, although they aren’t the best form of pipe clip, especially in the smaller sizes, you’re better off with petrol pipe clips, but jubilee will be fine, the gas is at very low pressure anyway, probably not even enough to warrant a clip (please use clips though, that was only …
How tight should a jubilee clip be?
Jubilee clips should be tightened as much as is possible with a screwdriver but not so tight that they cut into the hose. If there are no signs of corrosion, leaking or hose deterioration, it is best to leave hose connections intact at the winter overhaul.