What is DensArmor used for?
Moisture- and mold-resistant1, DensArmor Plus Abuse-Resistant Panel is formulated for high traffic areas such as corridors in hospitals, schools and other public buildings. This tested, abuse-resistant, interior drywall resists abrasions, gouging, indentation, scrapes and bumps that can mar traditional drywall.
Where is DensArmor plus used?
DensArmor Plus® Interior Panels They’re ideal for areas prone to high humidity such as basements and residential bathrooms, and are ideal for commercial pre-rock installations. They are designed for direct attachment with screws or nails to wood and metal framing or existing surfaces.
How do you finish DensArmor plus?
The finishing and sanding of DensArmor Plus® Interior Panels should be performed in accordance with the most current version of Gypsum Association Publication GA-214 “Recommended Levels of Gypsum Board Finish.” Joints between DensArmor Plus panels may be finished with either paper tape embedded with all-purpose joint …
Is DensArmor plus fire rated?
DensArmor Plus Fireguard exhibits 15 flame spread as tested per ASTM E 84 or CAN/ULC S-102. A specially formulated gypsum core that includes glass fibers allows DensArmor Plus Fireguard to help protect framing members and prevent or delay the spread of fire.
Can you paint DensArmor plus?
5. To maximize the mold-resistant benefit of the DensArmor Plus Interior Panels, a 100% acrylic primer with mildecide should be used. High-quality flat or satin paint should be applied over the primer.
How do you cut DensArmor?
Using your T-square or straightedge and drywall knife, score the gypsum panel completely through the facer. Then use firm, even pressure to snap the board along the cut. Fold back the board, and use the knife to cut the back facer. Smooth rough edges.
Can you finish DensGlass?
DensGlass Sheathing is an ideal product for exterior ceilings and soffits for both cold and warm climate zones. It resists sagging, even under exceptionally humid conditions. Panels are applied directly to structural framing. Surface and joints may be finished and painted, or surfaced with an exterior finish system.
What is paperless drywall?
Paperless drywall is similar to traditional drywall in that it also contains a gypsum core. The difference is that instead of using paper as an outer wrapping, fiberglass is used instead. The gypsum core in paperless drywall is also water-resistant, unlike the core of traditional drywall.
Can you nail into DensGlass?
DensGlass Sheathing can be attached parallel or perpendicular to wood or metal framing. Nails or screws, as listed in the fastener chart, may be used to attach DensGlass Sheathing to framing.
What is the R value of DensGlass?
0.67
R-Value (ASTM C518): 0.67.
What’s the difference between green drywall and purple drywall?
What’s the difference between PURPLE drywall and traditional green drywall? Traditional green drywall (also known as greenboard) is only moisture-resistant. PURPLE drywall stands up to what standard drywall can’t, including moisture, mold, mildew, scratches, scuffs, dents and sound.