What is flow sense on an LG dryer?
The Flow Sense warning on your dryer is designed to help avoid reduced performance caused by. restrictions from the household exhaust system and alerting of such problem in the system so that. it may get fixed. The fix generally involved replacing the venting duct, shortening it or cleaning the.
What does flow sense d90 mean on LG dryer?
Your new LG Dryer is equipped with a duct blockage sensor that can help warn you of a potential blocked exhaust duct. If you see a d90 or d95 error on your control panel, your dryer has detected a 90% or 95% blockage in the duct work, prompting immediate attention.
How do you reset the flow sensor on a LG dryer?
To fix it, we’re going to do a factory reset.
- Unplug the dryer or trip the circuit breaker supplying power to the dryer off.
- While the dryer is without power, press and hold the Start/Pause button for 5 sec.
- Restore power and try to run a cycle.
What does the code d80 mean on LG dryer?
80% air blockage
The LG Dryer error code d80 indicates an 80% air blockage. The d80 error means the dryer is 80% clogged either in the air exhaust hose, wall ducts, or the vent outside. – Check to be sure the lint filter is clean. – Check the exhaust hose connected to the back of the dryer is not clogged or blocked by lint.
How do I check the flow cycle on my LG dryer?
Press and hold the Temperature Control and Signal button simultaneously, and then press the Power button. Once the display shows In5, press the Start/Pause button. The dryer will start the test which will run for approximately 2 to 3 minutes. Do not interrupt the test cycle as this could result in the wrong result.
What does the code d80 mean on my LG dryer?
The LG Dryer error code d80 indicates an 80% air blockage. This means the clothes dryer’s air exhaust is not pushing enough air out of the dryer through the venting to the outside of your home or apartment. The d80 error means the dryer is 80% clogged either in the air exhaust hose, wall ducts, or the vent outside.
Why is the cool light on on my LG dryer?
However, the fact that the “Cooling” indicator on the control panel stays illuminated during any one of these drying cycles might perplex you — is it actually drying or cooling the clothes at the moment? LG programmed this indicator on the dryer to stay lit and then flash when cooling actually begins.
What is the antibacterial setting on LG dryer?
Antibacterial or Sanitize: Dryer cycles or options that reach the specific temperature and time needed to kill 99.9% of bacteria in the load.