What is STP in WIFI?
The Spanning Tree Protocol (STP) is a network protocol that ensures a loop-free topology for any bridged Ethernet local area network. The basic function of STP is to prevent bridge loops and the broadcast radiation that results from them.
What does STP do and how is it enabled?
STP removes loops through an algorithm that guarantees that there is only one active path between two network devices. It ensures that traffic takes the shortest path possible within the network. It can also automatically re-enable redundant paths as backup paths in case the active path fails.
What is STP protocol in networking?
Spanning Tree Protocol (STP) is a link management protocol that provides path redundancy while preventing undesirable loops in the network. When it comes to ethernet networks, only one active path can exist between two stations in order for them to function properly.
What is the function of STP?
The Spanning Tree Protocol (STP) is a network protocol that builds a loop-free logical topology for Ethernet networks. The basic function of STP is to prevent bridge loops and the broadcast radiation that results from them.
Where do I enable STP on my router?
(Optional) Under the Per Port STP Status Setting area, check the check boxes to enable STP on your preferred Ethernet/WDS port. Note: In this example, STP is enabled on the GE1, GE3, GE4, GE5, WDS2, and WDS3 ports only.
What are benefits of enabling STP on a WiFi access point?
With both the access point physical Ethernet interface and the radio interface connected to the same broadcast domains — a loop was formed. Storm-control was in place and caught the broadcast storm in both places.
Why do I need to enable STP on an AP?
The purpose of STP is to prevent network path loops, but the AP only has one connection back to the switch, and only one connection to each client. Why would I want to enable STP on an AP, or would enabling it be moot?
How does the Spanning Tree Protocol ( STP ) work?
This document descibes Spanning Tree Protocol (STP) in a wireless environment. This section describes how spanning-tree features work. STP is a Layer 2 link management protocol that provides path redundancy while preventing loops in the network. For a Layer 2 network to function properly, only one active path can exist between any two stations.