What is the Molex connector on a motherboard for?
Certain Molex connectors are used for providing power to the motherboard, fans, floppy disk drive, CD/DVD drive, video card, some older hard drive models, and more. Compatible connectors are available from many manufacturers, not just Molex and AMP.
Can I use Molex to power CPU?
Don’t use molex. Connect this one. You should be able to connect it where 4 pins will stay in “air” or you can even separate them cause lot of those 8 pin cpu connectors come in form of 2*4 pin. if you can split it that is a better solution….
Does Molex plug into motherboard?
The 4 pin molex power connector on motherboards is found near the PCIe 16X slot is used for additional power for the video card in that slot. The manual explains it is there for modern, high power consuming cards, which do not have their own power connector on the card.
How do I identify a Molex connector?
The Molex connector is one where the male/female terminology is a bit odd. The female connector is usually found on the end of a cable, and it slips inside of a plastic shell which surrounds the male pins on the male connector.
What type of device would you connect a Molex cable to?
Which of the following devices would be connected to the power supply with a Molex connector? The Molex connector is a round-shaped connector that used to supply power to Parallel Advanced Technology Attachment (PATA) drives, optical drives, and Small Computer System Interface (SCSI) drives.
Do I need Molex cables?
Molex connectors are necessary when you don’t have any 3 pin headers left on your board to connect fans. Then you use molex connectors to connect the fans to your power supply rather than the motherboard.
What should be connected to the Molex connectors?
What devices use a Molex connector?
- Hard drive.
- Disc drive (e.g., CD-ROM, DVD, Blu-ray.)
- Video card.