When should I do my first oil change on my Polaris Ranger?

When should I do my first oil change on my Polaris Ranger?

Perform a break-in oil and filter change at 25 engine hours or one month of use — whichever comes first. Following break-in, change your oil and filter every 100 hours, six months or 1,000 miles — whichever comes first.

What kind of oil does a Polaris Ranger 900 XP take?

2.5 Quarts of Polaris PS-4 Full Synthetic 4-Cycle Engine Oil.

How many miles is high for a Polaris Ranger?

But what exactly are high miles on a Polaris Ranger? A lot of people will agree that a Polaris Ranger that has 10,000 miles on it is generally one considered to have high miles.

How often should I grease my Polaris Ranger?

Registered. After every ride is best especially if you are riding in water. Greasing will push the moisture out and save on wear and tear.

What weight is Polaris PS-4 oil?

Polaris Recommended Oil Weight Xp1000 (PS4)5w-50 (PS4E)10w-50.

What kind of oil do you use in a Polaris Ranger?

Includes everything you need to change your oil: 2.5 Quarts of PS-4 Full Synthetic 5W-50 Engine Oil. 1 Polaris Oil Filter, PN 2540086.

How do you maintain a side by side?

Top 10 Maintenance Tips for Your UTV

1. Change the Oil and Oil Filter.
2. Check the Coolant Level.
3. Change the Engine Air Filter.
4. Keep the Fittings Lubricated.
5. Change the Spark Plugs.
6. Inspect the Tires.
7. Check the Fuel.
8. Maintain or Replace the Battery.

How to change the oil on a Polaris Ranger 900 XP?

Here’s how to do an oil change on a Polaris Ranger 900 XP. Step 1. Start by running your engine for a couple of minutes to warm up the oil so it’ll be easier to drain. Step 2. Lift the bed to access the engine, then remove the oil fill cap on the valve cover. Step 3.

Where is the oil filter on a Ranger?

The oil filter included in the kit is part number 2540086. When changing the oil on your vehicle, always wear safety glasses and nitrile gloves. Always check and change the oil at the intervals outlined in the Periodic Maintenance Chart in your Owner’s Manual. The engine drain plug (2) is located on the bottom of the crankcase.

How to change service interval on Ranger XP 900?

To change the service interval, do the following: 1 1. Press the MODE button (3) until remaining service hours display. 2 2. Press and hold the MODE button. 3 3. When the service hours flash, press and release the MODE button to advance the hours to the desired setting (including OFF). Press and hold the

What should I wear when I change the oil on my Ranger?

When changing the oil on your vehicle, always wear safety glasses and nitrile gloves. Always check and change the oil at the intervals outlined in the Periodic Maintenance Chart in your Owner’s Manual.