Where do you install nitrous?

Where do you install nitrous?

MOUNTING THE BOTTLE The nitrous bottle should be mounted in the trunk area or outside of the passenger compartment. If this is not possible or practical a NHRA approved blow down tube and vent fitting (PN’s 11708, 11709) must be installed. The positioning of the bottle should be as shown in illustration “A”.

How do you attach nitrous?

How to Install Nitrous Oxide

1. Step 1: Mount the Bottle and Brackets. Find a safe location to mount the nitrous bottle.
2. Step 2: Install Nitrous Line.
3. Step 3: Remove the Carburetor.
4. Step 4: Set Up the Nitrous Plate.
5. Step 5: Adding Fuel.
6. Step 6: Install the Nitrous Plate and Carb.
7. Step 7: Wiring.
8. Step 8: Install Pressure Gauge.

How much does it cost to run nitrous?

How much does nitrous cost? Nitrous Express lists in their FAQ that a 10-second run uses approximately 0.8 pounds of nitrous, which sells for a nationwide average of $3.50 to $5.00 per pound. That means one fill will last an entire night at the drag strip.

Which nitrous kit is better wet or dry?

Dry nitrous kits are a great first step and require less work for installation and a small bump in power output. A wet nitrous kit will deliver a fuel/nitrous oxide mixture into your intake tract.

How much nitrous can a stock motor take?

Supporting Member. Nothing is ‘safe’ But 150 is the max that is recommended on a stock motor.

What is better dry or wet nitrous?

Dry nitrous kits are a great first step and require less work for installation and a small bump in power output. A wet nitrous kit will deliver a fuel/nitrous oxide mixture into your intake tract. However, with a wet nitrous kit, there is more risk of backfire.

How long does a 10 lb nitrous bottle last?

A: It depends on bottle capacity and the size of the nitrous shot being used. On the 75hp setting, a 10 lb. bottle will last around 10 quarter mile runs. On the 125hp setting the bottle will last around 6 runs.