How wide should a refrigerator cabinet be?
Standard opening for refrigerator is usually 36” wide and standard size of the wall cabinet over refrigerator 36” in width as well. In some cases the cabinet has to be smaller or bigger depending on the fridge size. The heights will vary from 12” to 24” depending on the walls cabinets and how big the refrigerator is.
What is the width of a single door fridge?
One door refrigerators typically have an average width of 32” | 81.3 cm, and commonly range between from 30”-36” | 76.2-91.4 cm. How long do one door refrigerators last?
What is refrigerator fit width?
Standard refrigerator sizes range from around 24 to 40 inches in width, 62 to 72 inches in height and 29 to 36 inches in depth. Generally speaking, french door and side-by-side refrigerators will be larger in width and height, though counter-depth models are frequently available in these two configurations.
How far should a fridge stick out from cabinets?
In short, the answer is yes. Your fridge will need about two inches of space away from the wall in the back to allow for air circulation. On the sides, you’ll want your fridge to have about 1/8 inch for a standard fridge and about 1 inch on each side for cabinet depth.
How much space should be between fridge and wall?
The refrigerator should be at least two inches from the wall. Top — If you have back coils, you will need at least two inches of top clearance to dissipate heat, but for bottom coils, as little as one inch can be sufficient. Sides — Regardless of coil placement, the sides require the least amount of space.
What is the actual width of a 36 inch refrigerator?
35.8in
Refrigerator Size: 36 inch. Product Width: 35.8in. Product Depth: 7in. Product Height: 9in.
How much space should be on side of fridge?
Side Clearance – Plan for between one-half inch to one-inch of clearance on both sides of the unit. Rear Clearance – Allow between one to two inches of space at the rear of the refrigerator for proper airflow.
How do I make my fridge space bigger?
Cutting into Counters and Removing Cabinets Remove the lower and upper cabinets, as applicable, to create more space. You can either install narrower units so as not to completely lose an entire cabinet, or the refrigerator may take up the entire space.
How big should a counter depth refrigerator be?
Counter depth refrigerators are usually no more than 27 inches deep compared to standard depth refrigerators which range between 32 to 34 inches wide. The inches shaved off from the width allow for the refrigerator to sit flushed with the kitchen cabinets, creating a seamless and aesthetically pleasing look.
How big is a side by side refrigerator?
The standard size of a French door refrigerator is 29 ½ to 36 inches in width, 68 ½ to 70 ⅛ inches in height and 29 ⅜ to 34 ⅝ inches in depth. Side-by-Side The average size of a side-by-side fridge is 32 ¾ to 39 ¾ inches in width, 65 ⅞ to 71 ¼ inches in height and 29 ¾ to 31 ⅛ inches in depth.
Why do refrigerators have to be 33 inches wide?
The inches shaved off from the width allow for the refrigerator to sit flushed with the kitchen cabinets, creating a seamless and aesthetically pleasing look. They also come at a higher price point compared to standard depth refrigerators.
What are the dimensions of a standard Whirlpool refrigerator?
Step 1: Review Standard Refrigerator Sizes & Dimensions Although the average size of a refrigerator varies depending on the type of fridge (bottom freezer, top freezer, French door or side-by-side), standard refrigerator dimensions range from 28 ¾ to 39 ¾ inches in width, 61 ¾ to 71 ¼ inches in height and 28 ¾ to 34 ⅝ inches in depth.